pneumatic torque wrenches - emazing international tool division



Welcome to the emazing international professional tools website


contact us	Manual- Pneumatic- Electric- Cordless- Torque Wrenches	Hydraulic Torque Wrenches Electro Hydraulic Pumps	Flexible Shaft Machines Electric Power Tools	Air Turbine Grinders	Angle Nutrunners Dust shrouds other tools

Alkitronic® Compact Pneumatic Torque Wrenches Type CL

the new generation of continuously rotating pneumatic torque wrenches - with no hammer mechanism
extremely compact design
save and easy mode of operation
secure and precise operation
easy change of direction - left to right hand operation
optimum transmission of high torque's
heavy duty gear box - proved design
low noise level
Ideal for operation in hazardous areas
replaces tube extensions and other inappropriate tools

Alkitronic® - Compact Pneumatic Torque Wrench Type CLD - with free joint design.
After attaching the reaction support arm you will be able to reach any position you may require due to the freely rotating handle (full 360°). Ideal torque wrench with high comfort and low weight for operating in confined areas. Torque range from 150 Nm up to 11'200 Nm.

Photo	Type / Model-No.	Torque Nm *	Square drive	Ø mm			Height mm	Idle speed 1/min	Weight** kg
Photo	Type / Model-No.	Torque Nm *	Square drive	D1	D2	D3	Height mm	Idle speed 1/min	Weight** kg
	CLD 55	165-485	3/4"	41	85	88	280	48	7.0
	CLD 85	305-895	3/4"	41	85	88	300	25	8.5
	CLD 85	305-895	1"	54	85	88	300	25	8.5
	CLD 105	365-1080	1"	54	85	88	300	15	8.5
	CLD 125	450-1315	1"	54	85	88	300	12	8.5
	CLD 155	590-1730	1"	54	85	88	300	10	8.5
	CLD 225	910-2670	1"	54	85	88	300	8	9.0
	CLD 280	1180-3460	1"	54	85	88	300	4	12.0
	CLD 380	1490-4380	1 1/2"	72	98	98	320	4	12.0
	CLD 580	2080-6115	1 1/2"	72	123	123	350	2.5	16.0
	CLD 780	3265-9595	1 1/2"	72	148	148	350	1	19.0
	CLD 980	3810-11195	1 1/2"	91	173	173	370	0.5	25.0
	20350	Air Maintenance unit complete with filter, regulator, lubricator, 5 m flexible air hose, including air couplings and fittings, air lubrication oil. Mounted on base plate with transport handle. In order to maintain maximum performance and lifetime of the pneumatic torque wrench the compressed air needs to be lubricated. The torque of the pneumatic torque wrench is regulated by the regulator. An air pressure of 2 - 7 bar with an air volume of approx. 10-15 litres/second ensures optimal operating conditions. The torque accuracy depends on the stability of the air supply!
	* The torque is controlled by the air pressure and controlled by the air regulator of the air maintenance unit. Example of a torque flow chart stating the torque values at different levels of air pressure from 2-7 bar. For loosening bolts a reserve of approx. 20 % has to be added to the max. torque. Click here to view bigger torque chart as an example ** Weight without torque reaction arm

Alkitronic® - Compact Pneumatic Torque Wrench Type CLS - rigid connection of motor body and gear box. The position of the torque wrench can be adjusted by 10-15 degree steps by positioning the torque reaction arm on the spline drive of the drive unit.
The ideal machines for the low torque range from 60 up to 3'500 Nm.

Photo	Type / Model-No.	Torque Nm *	Square drive	Reaction arm type	Ø mm			Height mm	Idle speed 1/min	Weight** kg
Photo	Type / Model-No.	Torque Nm *	Square drive	Reaction arm type	D1	D2	D3	Height mm	Idle speed 1/min	Weight** kg
	CLS 15	60-220	1/2"	10251	41	85	88	255	60	6.0
	CLS 15	6-220	3/4"	10251	41	85	88	255	60	6.0
	CLS 25	95-280	3/4"	10251	41	85	88	255	38	6.5
	CLS 35	135-390	3/4"	10251	41	85	88	255	34	6.5
	CLS 45	165-485	3/4"	10251	41	85	88	255	27	6.5
	CLS 75	305-895	3/4"	10251	41	85	88	277	19	7.5
	CLS 95	365-1080	3/4"	10251	41	85	88	277	13	7.5
	CLS 135	495-1450	1"	10252	54	85	88	300	9	8.0
	CLS 175	645-1900	1"	10252	54	85	88	300	7	8.0
	CLS 255	910-2670	1"	10253	54	85	88	330	6	9.0
	CLS 315	1180-3460	1"	10253	54	85	88	330	4	9.0
	20350	Air Maintenance unit complete with filter, regulator, lubricator, 5 m flexible air hose, including air couplings and fittings, air lubrication oil. Mounted on base plate with transport handle. In order to maintain maximum performance and lifetime of the pneumatic torque wrench the compressed air needs to be lubricated. The torque of the pneumatic torque wrench is regulated by the regulator. An air pressure of 2 - 7 bar with an air volume of approx. 10-15 litres/second ensures optimal operating conditions. The torque accuracy depends on the stability of the air supply!
	* The torque is controlled by the air pressure and controlled by the air regulator of the air maintenance unit. Example of a torque flow chart stating the torque values at different levels of air pressure from 2-7 bar. For loosening bolts a reserve of approx. 20 % has to be added to the max. torque. Click here to view bigger torque chart as an example ** Weight without torque reaction arm ATTENTION: make sure to securely placing the torque reaction arm before operating the wrench - CLS torque wrenches are high speed rotating assembly tools.

back to top

Alkitronic® - Compact Pneumatic Torque Wrench Type CLS-2 - 2 speed gearbox.
Change of speed through mechanical gearbox, from quick mode to power mode. Torque's ranging from 120 Nm up to 48'600 Nm can be achieved. Rigid connection of motor body and gear box. The position of the torque wrench can be adjusted by 10-15 degree steps by positioning the torque reaction arm on the spline drive of the drive unit. The ideal torque wrench when high output and flexibility is required.

Photo	Type / Model-No.	Torque Nm *		Square drive	Reaction arm type	Ø mm			Height mm	Idle speed 1/min		** Weight kg
Photo	Type / Model-No.	2 speed	1 speed	Square drive	Reaction arm type	D1	D2	D3	Height mm	2 speed	1 speed	** Weight kg
	CLS 2/100	120-355	380-1125	3/4"	10251	41	85	88	330	36	12	7.0
	CLS 2/150	170-505	550-1615	1"	10252	54	85	88	330	21	7	7.5
	CLS 2/300	385-1130	1225-3595	1"	10253	54	85	88	360	15	5	9.0
	CLS 2/400	540-1585	1720-5055	1 1/2"	10255	72	98	98	380	9	3	11.0
	CLS 2/600	840-2470	2675-7865	1 1/2"	10256	72	123	123	410	6	2	15.0
	CLS 2/800	1010-2965	3210-9435	1 1/2"	10256	72	148	148	410	5	1.5	20.0
	CLS 2/1000	1175-3455	3745-11010	1 1/2"	10257	91	173	173	430	4	1	24.0
	CLS 2/1700	1600-4800	5800-17000	2 1/2"	10416	SW 120	275	275	570	1	0.5	60.0
	CLS 2/3400	3300-9700	11500-34000	2 1/2"	10416	SW 120	275	275	570	0.8	0.4	60.0
	CLS 2/4800	4700-13900	16000-48600	2 1/2"	10416	SW 120	275	275	570	0.6	0.3	60.0
	20350	Air Maintenance unit complete with filter, regulator, lubricator, 5 m flexible air hose, including air couplings and fittings, air lubrication oil. Mounted on base plate with transport handle. In order to maintain maximum performance and lifetime of the pneumatic torque wrench the compressed air needs to be lubricated. The torque of the pneumatic torque wrench is regulated by the regulator. An air pressure of 2 - 7 bar with an air volume of approx. 10-15 litres/second ensures optimal operating conditions. The torque accuracy depends on the stability of the air supply!
	* The torque is controlled by the air pressure and controlled by the air regulator of the air maintenance unit. Example of a torque flow chart stating the torque values at different levels of air pressure from 2-7 bar. For loosening bolts a reserve of approx. 20 % has to be added to the max. torque. Click here to view bigger torque chart as an example ** Weight without torque reaction arm

tips and tricks

print this page

add to favorites