Manual or Hand Torque Multipliers Electric Electronic Torque Wrenches Pneumatic Air Torque Wrenches Hydraulic Torque Wrenches and Power Packs, Flexible Shaft Machines Oilfree Air Nutrunners, Automatic shut-off angle torque wrenches, Dust shrouds


Alkitronic® Tangential Pneumatic Torque Wrench Type CLS-SG

  • Ideal tool for applications on plate heat exchangers
  • Consistent quality and low running costs
  • Optimal application to plate heat exchangers
  • Suited for work in explosive gas atmospheres
  • Perfect for work in confined areas
  • The use of pneumatic torque wrenches with tangential gearing (e.g. 2 - diagonally or crosswise) ensures an
    optimal speed and accuracy in assembling large plates.
  • Optional remote control type FBL offers you the perfect solution.

Alkitronic® tangential gear attachments

Alkitronic® - CLS-SG Pneumatic Tangential Torque Wrench
Photo Type /
Model-No.		 Torque
Nm 		Height overall
mm 		Height
H = mm 		Width
B =mm 		Length
L =mm 		Gear
ratio 		Weight
kg
complete with pneumatic torque wrench type CLS 100
 CLS-SG 65 1'280 - 3'780 480 225 270 260 1 : 3.77 16.5
CLS-SG 80
complete with pneumatic torque wrench type CLS 100
back to top

Alkitronic® - STA Insert Hex Adaptors
Simply insert into existing hex drive of machine to reduce to required bolt size
Photo Type /
Model-No.		 Hex size
OD mm		 Hex size
ID mm		 To suit Torque Wrench Type
STA Hex Adaptors STA 65 - 55
 65 55 CLS-SG 65
STA 65 - 50 50
STA 65 - 46 46
STA 65 - 41 41
STA 65 - 36 36
STA 80 - 70
 80 70 CLS-SG 80
RCL 80 P
STA 80 - 65 65
STA 80 - 60 60
STA 80 - 55 55
STA 80 - 50 50
STA 80 - 46 46
back to top

Alkitronic® FBL - Air supply system for a constant and simultaneous operation of 2 machines
Photo Description
Alkitronic® - Air supply system for a constant and simultaneous operation of 2 machines

The perfect solution for a constant and simultaneous operation of 2 RCL Pneumatic Torque Wrenches when used on heat exchangers.

Air supply, air pressure and air lubrication is controlled by one air maintenance unit, where the air pressure is adjusted to suit the required operating torque according to the torque chart supplied with each tool.
Air Maintenance unit complete with filter, regulator, lubricator, 5 m flexible air hose, including air couplings and fittings, air lubrication oil. Mounted on base plate with transport handle.

Air Maintenance unit complete with filter, regulator, lubricator, 5 m flexible air hose, including air couplings and fittings, air lubrication oil. Mounted on base plate with transport handle.

In order to maintain maximum performance and lifetime of the pneumatic torque wrench the compressed air needs to be lubricated.

The torque of the pneumatic torque wrench is regulated by the regulator. An air pressure of 2 - 7 bar with an air volume of approx. 10-15 litres/second ensures optimal operating conditions.

The torque accuracy depends on the stability of the air supply!
Example of a torque flow chart stating the torque values at different levels of air pressure from 2-7 bar. For loosening bolts a reserve of approx. 20 % has to be added to the max. torque.

* Example of a torque flow chart stating the torque values at different levels of air pressure from 2-7 bar. For loosening bolts a reserve of approx. 20 % has to be added to the max. torque.