Manual or Hand Torque Multipliers Electric Electronic Torque Wrenches Pneumatic Air Torque Wrenches Hydraulic Torque Wrenches and Power Packs, Flexible Shaft Machines Oilfree Air Nutrunners, Automatic shut-off angle torque wrenches, Dust shrouds


Alkitronic® Electric Compact Torque Wrenches Type EFCip - EFCipplus - ECWip - ECWip plus
  • Ribbed housing for optimised motor cooling
  • Robust motor housing made of cast injection molded high quality aluminium
  • Touch control interface protected with long lasting foil
  • Control parts are protected even when tool is dropped
  • IP54 protection - save to use on site with water splash resistance rating Protection class 1 - CE certified
  • Integrated thermal overload protection of the motor
  • three types available:
    - EFCip with 19 selectable torque settings, LED-display
    - EFCip plus with programmable modes for torque and angle via LCD display
  • compact, fast, handy, reliable, economical
  • micro processor controlled, brush free synchronised motor = consistent bolt tightening quality
  • maintenance free and low in wear
  • up to 3 times faster then conventional electric wrenches
  • highest precision - exact shutoff when required torque is achieved
  • huge torque range - big variety of products for each application
  • safe and easy to use tool, ergonomic design
  • NEW - model EWCip with integrated angle head - ideal for use in confined areas

Alkitronic® Electric Compact Torque Wrenches Type EFCip - EFCipplus - ECWip - ECWip plus
Alkitronic® - EFCip and EFCipplus Electric Compact Torque Wrenches
name="Air Turbine" class="contentCentre" align="center" width="97%">
Photo Type /
Model-No.		 Torque
ca.Nm *		 Square Drive Ø mm
 Length
mm 		Idle speed
1/min 		Weight**
kg
D1 D2 D3

 

 EFCip - EFCip plus 10
 70 - 400 3/4" 41 85 88 330 76 9.0
EFCip - EFCip plus 20 80 - 600 3/4" 41 85 88 330 38 9.0
EFCip - EFCip plus 30 150-1000 3/4" 41 85 88 330 24 9.0
EFCip - EFCip plus 40 250-1500 1" 54 85 88 382 15 10.0
EFCip - EFCip plus 50 300-1800 1" 54 85 88 382 13 10.0
EFCip - EFCip plus 60 450-2500 1" 72 98 98 400 12 11.0
EFCip - EFCip plus 70 600-3500 1 1/2" 72 98 98 400 9 13.2
EFCip - EFCip plus 80 800-4200 1 1/2" 72 98 98 406 7 13.2
EFCip - EFCip plus 90 1000-5000 1 1/2" 72 98 98 428 6 17.5
EFCip - EFCip plus 100 1300-6300 1 1/2" 72 98 98 436 4 18.5
Motors for all models: 110-253 Volt, Frequency 45-66 Hz, max. power 2000 Watt

* In order to be able to loosen bolts please add 20 % on top of the max. required tightening torque. Continuous operation at maximum load will activate the thermal overload protection and shut off the tool.

** Weight without torque reaction arm

back to top

Allweather Angle Head Electric Torque Wrench Type EWCip and EWCip plus
Electric Shut-off torque wrenches with integrate angle head - ideal for use in confined areas
Moisture- and splash water resistant, CE certified, protection class IP 54
name="Air Turbine" class="contentCentre" align="center" width="97%">
Photo Type /
Model-No.		 Torque
ca.Nm *		 Square Drive Ø mm
 Lenght
mm 		Idle speed
1/min 		Weight**
kg
D1 D2 D3

Allweather Angle Head Electric Torque Wrench Type EWCip and EWCip plus

 

 

ECWip - ECWip plus 10
 60 - 420 3/4" 41 85 88 310 78 12.0
ECWip - ECWip plus 20 80 - 620 3/4" 41 85 88 310 40 12.0
ECWip - ECWip plus 30 150-1050 3/4" 41 85 88 310 26 12.0
ECWip - ECWip plus 40 250-1510 1" 54 85 88 310 17 13.0
ECWip - ECWip plus 50 300-1830 1" 54 85 88 310 15 14.0
ECWip - ECWip plus 60 450-2430 1" 72 98 98 310 14 14.0
ECWip - ECWip plus 65 450-3000 1" 72 98 98 310 14 14.0
ECWip - ECWip plus 70 600-3480 1 1/2" 72 98 98 318 11 16.0
ECWip - ECWip plus 80 750-4260 1 1/2" 72 98 98 318 9 16.0
ECWip - ECWip p plus 90 980-5030 1 1/2" 72 98 98 326 6 16.0
ECWip - ECWip plus 100 1260-6480 1 1/2" 72 98 98 315 3.5 18.0
Motors for all models: 110-253 Volt, Frequency 45-66 Hz, max. power 2000 Watt

* In order to be able to loosen bolts please add 20 % on top of the max. required tightening torque. Continous operation at maximum load will activate the thermal overlad protection and shut off the tool.

** Weight without torque reaction arm
ECWip Dimensions


name="Air Turbine" class="contentCentre" width="97%" align="center">
Alkitronic® - Detailed description

Blocking pin for use of the machine as rigid version (fixed joint motor/gearbox)
Locking pin for use of the machine as rigid version (fixed joint motor/gearbox)


One-handed operation, four-edge operation button for clock wise, counter clock wise, toggle start and start commands
  • Primary operation unit: on/off switch of the machine; One-handed operation: comfortable, slow right/left rotation for safe and precise positioning of the torque wrench (toggle switch) as well as for the starting of the bolt tightening process.
  • Speed, frequency and torque are correspondingly regulated and controlled. Microcontrolled monitoring combined with a processor controlled switch-off electronic guarantee a precise repeatability of the pre-set torque. Repeatable accuracy for shutoff is +/- 5% for identically soft and hard joints.
  • Integrated motor protection: for safety reasons an automatic thermal overload switch is built in as well as a permanent cooling fan that keeps running after the safety shutoff and thus provides short periods of cooling.
  • Two principles of construction within one tool:
    A = swivelling: free joint tool - the drive unit (motor) can independent of the gear box be fully rotated even when the reaction arm is already in its position
    B = Rigid: Fixed joint between motor and gear box - mechanically reversible
  • One-handed operation via a combined switch for comfortable handling: slow Right-/Left- rotation for save and precise positioning of the tool (toggle switch operation) as well as start of the bolt tightening operation
  • Ergonomic operation concept for bolting functions and torques:
    Display with adjustment of shut-off torques, released angle, finishing angle tortion etc incl menu operation via display panel (functions depend on specifications of selected tool type).
  • High profitablility & safety: due to problem-free operation upon any kind of weather - dampness or rain, no downtime, no danger. Protection class IP54 standard!
  • Suitable for all international electric networks: the tools can be run on virtually any power supplied from 100V up to 253 Volt and 45-66 Hz. The micro processor controlled, brush free synchronised motor always produces consistent bolt tightening quality even when operated on generators.
  • Maintenance free with low operating costs completey closed motor housing, brush-free synchronised motor, high quality injection moulded cast aluminium housing, solid steel gear box is made to last and last !
  • Secondary operation unit - Type EFC ip

    LED-Display    : light-emitting diode displays the pre-set torque within 19 stages together with the direction of rotation

programme selection - esc
  • Secondary operation unit - Type EFCip plus
    (provision of functions dependent of the torque type):
    Display and adjustment of shutoff torque's, sense of rotation, angle, loosening, rotations in angle degrees or number of rotations incl. menu operation etc.