Manual or Hand Torque Multipliers Electric Electronic Torque Wrenches Pneumatic Air Torque Wrenches Hydraulic Torque Wrenches and Power Packs, Flexible Shaft Machines Oilfree Air Nutrunners, Automatic shut-off angle torque wrenches, Dust shrouds


Alkitronic® Electro Hydraulic Pump Type EHPC Alkitorc
  • Gentle operation guarantees long service life of tools
  • Environmentally friendly - very quiet operation
  • Speed-, pressure- and volume dependent control
  • Micro processor controlled, brush free synchronised motor delivers consistent pressure and bolt tightening quality
  • A variety of operational programs to select
  • Direction switch assures powerful and gentle changeover from power to idle stroke - no magnetic valve control
  • minimal heat production of the oil
  • low running cost - minimal maintenance - low weight
  • suitable for all international power supplies (100-253V/45-66Hz)
name="Air Turbine" class="contentCentre" width="97%" align="center">
Photo Alkitronic® - EHPC Electro Hydraulic Pump Alkitorc
Alkitronic® - EHPC Electro Hydraulic Pump

Direction switch allows powerful and careful change from power stroke to idle stroke. "Gentle" operation guarantees long life of the tools (no magnetic valve control).

Due to the CW / CCW direction an overflow of heat into the oil tank is virtually impossible. Motor 2000 Watt - brush free synchronised - maintenance free.
Type / Model No. Oil flow
l / min		 Tank
capacity
litre		 Dim.
L x B x H mm		 Noise
level
dB(A)		 Motor Weight
kg
LP* HP**
EHPC
71501
10.5 1.1 7 355x 280x570 <76 110/230 V
60/50 Hz		 26.0
The pump system consist of the EHPC electro-hydraulic pump, a remote control type FBE (5m length), all necessary hydraulic connections such as couplings and fittings, a pressure gauge 0-700 bar, class 1.0.

Not included with the pump are the hydraulic hoses. Please select the desired hoses from the table below.

* LP = Low pressure operation / ** HP = High pressure operation

back to top

name="Air Turbine" class="contentCentre" width="97%" align="center">
Photo Alkitronic® - EHPCplus Electro Hydraulic Pump Alkitorc
Alkitronic® - EHPC Electro Hydraulic Pump

Direction switch allows powerful and careful change from power stroke to idle stroke. "Gentle" operation guarantees long life of the tools (no magnetic valve control).

Due to the CW / CCW direction an overflow of heat into the oil tank is virtually impossible. Insulation protection class IP54. Motor 2000 Watt - brush free synchronised - maintenance free.
Type / Model No. Oil flow
l / min		 Tank
capacity
litre		 Dim.
L x B x H mm		 Noise
level
dB(A)		 Motor Weight
kg
LP* HP**
EHPC plus
71506
 9.5 0.5 7 355x 280x570 <76 110/230 V
60/50 Hz		 24.5
The pump system consist of the EHPC electro-hydraulic pump, a remote control type FBEplus (5m length), all necessary hydraulic connections such as couplings and fittings, a pressure gauge 0-700 bar, class 1.0.

Not included with the pump are the hydraulic hoses. Please select the desired hoses from the table below.

* LP = Low pressure operation / ** HP = High pressure operation

back to top

name="Air Turbine" class="contentCentre" width="97%" align="center">
Photo Alkitronic® - EHPC regulation and control options
Manual control:
by pressing the button trigger the cylinder is extended. When loosening the cylinder is being retracted. The pump shuts off automatically after 2-3 seconds.
Automatic control:
The start function enables the cylinder to either extend or retract automatically. 19 different time interval settings correspond to the 19 different Types of tools available. The assignment of the appropriate time setting for the individual hydraulic torque wrench can be adjusted manually on site.
name="Air Turbine" class="contentCentre" width="97%" align="center">
Photo Alkitronic® - EHP Hydraulic hoses

The hydraulic hoses are supplied assembled with hydraulic couplings and fittings. A wrong connection of the hoses can thereby be eliminated. If required the hydraulic hoses can also be coupled together to extend the total hose length. Hydraulic hoses have to be ordered as a set of 2.
Type Part-No. Length
m
BHDS 02 71001 0.2
BHDS 2 71043 2.0
BHDS 5 71003 5.0
BHDS 10 71004 10.0