Manual torque multipliers M - emazing international tool division



Welcome to EIT Professional - the emazing international professional tools website

Torque Tools Manual Torque Multipliers EIT Multipliers Alkitronic Multipliers Cordless Torque Wrenches Electric Torque Wrenches Alkitronic Compact EFC/L Alkitronic Allweather Type EFCip Alkitronic Tangential EFC-SG Alkitronic Radial EFC-R Alkitronic Angle Head EWCip Pneumatic Torque Wrenches Alkitronic High speed CLD/L Alkitronic Compact CLD CLS Alkitronic Remote Control CLV Alkitronic Tangential CLS-SG Alkitronic Radial RCL ITH Nutrunner Hydraulic Torque Wrenches ITH Compact Wrenches Alkitechnic TU Alkitechnic TX Hydraulic pumps Overview by brand Alkitronic EIT ITH EIT Tools & Acc EIT Hand Torque Multipliers EIT Flexible Shaft Machines EIT Dust Shrouds EIT Oilfree Air Angle Nutrunners EIT Tools Overview Tips & Hints Bolt Tension Charts Torque Charts Conversion Charts Special offers About us Contact us Home

Alkitronic® Manual torque multipliers, handy, solid, bullet-proof

high torque output easy to operate - precise results high working safety - short operating cycles simple bolt loosing - controlled tightening compact, solid construction, maintenance free no power supply required - ideal for site work			Cordless Torque wrenches Electric torque wrenches - shutoff Type Pneumatic torque wrenches Hydraulic torque wrenches Electric torque wrenches tangential gear head Manual torque measuring system Pneumatic torque measuring system Torque reaction arms Hand Torque Multipliers EIT
alkitronic© Manual torque multipliers, the ideal tool for torque-controlled tightening and loosening of high torque bolt connections. Forget hammers, pipe extensions, ring wrenches and other unsuitable tools! Low force required - optimum transmission of high torque's. The integrated planetary gear box multiplies the power input. We can offer you the perfect type for all bolt connections from 1'500 Nm up to 50'000 Nm!

Photo	Alkitronic® - H H/G Manual torque multipliers
	alkitronic- torque multipliers for torque's of up to 50'000 Nm. All models (except for H10 & H15) are equipped with a locking system that allows effective work even by using only short movements with the ratchets. The individual components of the gear box are not machined, this guarantees minimum wear even at the highest levels of use. The torque accuracy depends on the tolerance of the torque wrenches used to operate the torque multipliers. The torque multipliers can either be operated using standard 3/4" drive torque- or ratchet wrenches or by using the hand wheel for the pre-tightening of loose bolts. Also supplied is an adapter 1/2" female square drive to 3/4" male drive.
Photo	Type / Model No.	Torque Nm	Square drive B	Torque reaction arm	Gear ratio	Ø D mm	Height ca. mm	Weight kg
	H 10 **	1'500	1/2", 3/4"	10251	4	85	180	3.5
	H 15	2'000	1"	10252	4	85	200	4.0
	HG 10 **	1'500	1/2", 3/4"	10251	4	85	180	3.5
	HG 15	2'000	1"	10252	4	85	200	4.0
	HG 20	3'500	1"	10253	16	85	235	6.0
	HG 30	5'000	1 1/2"	10255	18	98	250	7.0
	HG 40	6'000	1 1/2"	10256	20	123	280	15.0
	HG 50	8'000	1 1/2"	10256	24	148	280	16.0
	HG 60	11'500	1 1/2"	10257	28	173	290	28.0
	HG 80	50'000	2 1/2"	10416	180	275	360	58.0
	All models are supplied with a torque reaction arm. To view other reaction arms or rings click here.
	** Max. indicated torque is also the breaking point of the square drive. The built in shearing pins will not prevent the breakage of the square drives 1/2" & 3/4".

NEW: EIT
HAND TORQUE MULTIPLIERS

EIT Hand Torque Multipliers

back to top

tips and tricks

contact us

print this page

add to favorites

All design and content © 2001-2010 Emazing International - PO Box 821 - Mudgeeraba QLD 4213 - Australia - ABN 61 149 129 938 - last updated 27.8.10