Alkitronic pneumatic radial torque wrenches Type RCL - emazing international tool division



Welcome to the emazing international professional tools website


contact us	Manual- Pneumatic- Electric- Cordless- Torque Wrenches	Hydraulic Torque Wrenches Electro Hydraulic Pumps	Flexible Shaft Machines Electric Power Tools	Air Turbine Grinders	Angle Nutrunners Dust shrouds other tools

Alkitronic® Compact Pneumatic Radial Torque Wrench Type RCL 36P, RCL 46P, RCL 80P

specially designed for use at extremely protruding screw ends found with heat plate exchangers
the new generation of continuously rotating pneumatic torque wrenches - with no hammer mechanism
extremely compact design
save and easy mode of operation
secure and precise operation
easy change of direction - left to right hand operation
optimum transmission of high torque's
heavy duty gear box - proved design
low noise level
Ideal for operation in hazardous areas

Alkitronic® - Compact Radial Torque Wrench Type RCL 36P / RCL 46P with 2 speeds.
Optimal application to plate heat exchangers, also in explosive gas atmospheres and in confined areas. The use of two torque wrenches (diagonally or crosswise) ensures an optimal speed and accuracy in assembling large plates. The Alkitronic remote control Type FBL offers you the perfect solution.
2-speed mechanical gearbox - torque range from 590Nm to 4'535 Nm.

Photo	Type / Model No.	Torque Nm *		Hex drive mm	Dim. mm			Idle speed 1/min		Weight kg
Photo	Type / Model No.	2 Gear	1 Gear	Hex drive mm	H	B	X/Y	2 Gear	1 Gear	Weight kg
	RCL 36P	590 - 1730	1440 - 4235	36	400	163	56	3	1	12.5
	RCP 46 P	630 - 1850	1545 - 4535	46	435	188	73	3	1	14.0
	Bolt distance in mm: RCL-36P A1 = 100mm RCL-46P A1 = 112 mm				Plate Heat Exchanger

Alkitronic® - Compact Radial Torque Wrench Type RCL 80P.
Optimal application for larger plate heat exchangers, also in explosive gas atmospheres and in confined areas. The use of two torque wrenches (diagonally or crosswise) ensures an optimal speed and accuracy in assembling large plates. The Alkitronic remote control Type FBL offers you the perfect solution.
2-speed mechanical gearbox - torque range from 670 Nm to 4'840 Nm.

Photo	Type / Model No.	Torque Nm *		Hex drive mm	Dim. mm			Idle speed 1/min		Weight kg
		2 Gear	1 Gear		H	B	X/Y	2 Gear	1 Gear
	RCP 80 P	670 - 1975	1645 - 4840	80	450	230	85	6	2	21.0
	Bolt distance in mm: A1 = 130mm / A2 = 160mm				Application shown on Alfa-Laval Heat Exchanger

Photo	Description
	The perfect solution for a constant and simultaneous operation of 2 RCL Pneumatic Torque Wrenches when used on heat exchangers. Air supply, air pressure and air lubrication is controlled by one air maintenance unit, where the air pressure is adjusted to suit the required operating torque according to the torque chart supplied with each tool.
	Air Maintenance unit complete with filter, regulator, lubricator, 5 m flexible air hose, including air couplings and fittings, air lubrication oil. Mounted on base plate with transport handle. In order to maintain maximum performance and lifetime of the pneumatic torque wrench the compressed air needs to be lubricated. The torque of the pneumatic torque wrench is regulated by the regulator. An air pressure of 2 - 7 bar with an air volume of approx. 10-15 litres/second ensures optimal operating conditions. The torque accuracy depends on the stability of the air supply!
	* Example of a torque flow chart stating the torque values at different levels of air pressure from 2-7 bar. For loosening bolts a reserve of approx. 20 % has to be added to the max. torque.

tips and tricks

print this page

add to favorites