| Picture |
Type |
Torque range
Nm |
Free speed
rpm |
Length
mm |
Side to centre
dist. mm |
Angle
head
height
mm |
Drive
square |
Rever-
sible |
Weight
kg |
|
|
EIT-472ABSF |
1.0
- 7.0 |
275 |
180 |
12 |
33 |
3/8" |
Yes |
0.69 |
| EIT-611ABSF |
3.0 - 12.0
|
550 |
215 |
13 |
33 |
3/8" |
Yes |
1.3 |
|
This reversible lever valve type
model is equipped with an automatic, adjustable
clutch. The motor shuts off at the preselected
torque with a precision of +/- 3%!
The special non-lube oilfree model is fitted with
a hardened cylinder bush and patented composite
vanes that allow oilfree operation of the tool
even in continuous use. Reverse the rotation by
sliding the reverse/forward ring in clockwise/counterclockwise
direction.
|
 |
Easy Torque Adjustment
The torque can be adjusted as follows: Unscrew
the torque ring in clockwise direction, move the
sleeve towards the angle head housing to expose
the internal, hexagonal torque adjusting ring.
|
 |
Torque Reference Scale
A scale of 0-10 is shown on the gear housing
under the hexagonal torque ring and serves a
a reference for the torque selection. 0 equals
the lowest torque setting, 10 the highest.
Move the hexagonal torque adjusting ring to
the left to increase the torque or to the left
to decrease the torque. Once the desired setting
is chosen, screw the torque ring sleeve back
onto the housing.
|
 |
Colour Coding of multiple tools
in operation
Choose one of the four different torque colour
rings (green, yellow, red, blue) to identify various
tools of the same type with the selected torque.
Slide the torque colour ring over the housing
and place into the torque indicator groove.
|